For your business · Battery

Battery storage sized to how your site uses power

A commercial battery is sized twice: in kWh for how much energy it holds and in kW for how fast it can deliver it. We size both to your load profile and to what you need it to do.

Tall white battery unit with warning signage beside an inverter

Your question

“What would a battery do for our site: lower peaks, store solar, or keep critical loads running?”

Batteries can store surplus solar, reduce short demand peaks or support selected loads during outages. Each goal sizes the battery differently, so we start by agreeing what it is for and checking it against your interval data.

This usually fits when

  • Surplus solar is exported at low value
  • Demand charges or short peaks drive the bill
  • Critical equipment needs to ride through outages
  • A multi-unit building wants to share stored solar

Sizing

What the design depends on

These are the inputs we check before recommending a size. Numbers in your proposal are labelled as kW (power), kWh (energy) or estimate.

Energy (kWh)
How much stored energy the use case needs, from evening load to peak periods.
Power (kW)
How fast the battery must deliver energy to cover peaks or critical loads.
Solar surplus
What the existing or planned solar system can put into the battery.
Tariff structure
Demand and time-of-use charges change the value of each kWh stored.
Location and safety
Plant room space, ventilation, clearances and isolation requirements.
kW
Power: panel, inverter or charger size
kWh
Energy: stored in a battery or produced over time
Estimate
Calculated before or during design, not measured
Measured
Read from monitoring or meter data

Scope

What is included, and what depends on the site

Included

  • Use-case review and interval data analysis
  • Battery and inverter sizing (kWh and kW)
  • Installation with isolation and signage
  • Commissioning and monitoring set-up

Depends on the assessment

  • Backup circuits and switchboard changes
  • Network approvals
  • Virtual power plant or market participation, checked against current rules

Want to know what this looks like for your property?

Multi-unit

Four-residence building · NSW

One rooftop array shared by four residences

Solar and a 40 kWh battery shared between four residences and the common area, with a switchboard upgrade and roof remediation.

  • kW 16 kW (Aiko 475 W panels)
  • kWh 40 kWh

Steps

How the work runs

  1. Site and data review

    Interval data or bills, roof drawings, switchboard capacity and how the site operates through the day and week.

  2. Feasibility and design

    System options sized to the load profile and roof, with the assumptions behind any generation or savings estimate stated in writing.

  3. Proposal and staging

    Scope, programme and, where it helps the budget, a staged plan. Shutdowns are planned around your operations.

  4. Delivery

    Project managers, engineers and electricians coordinate access, safety, installation, commissioning and network approvals.

  5. Monitoring and support

    Monitoring set up from day one, and maintenance or fault response when the site needs it.

Commercial battery storage: questions

Can a battery reduce demand charges?

It can when the peaks are short and predictable enough for the battery’s kW and kWh to cover them. Interval data shows whether that is the case for your site.

Can it power the site in an outage?

Selected loads can be backed up when the battery, inverter and switchboard are designed for it. We agree which loads matter before sizing.

Are businesses eligible for battery incentives?

Some federal and NSW programmes include small businesses. Rules change, so we check eligibility for your site when we quote. Our SRES article explains the current settings.

Free quote · Commercial battery storage

Tell us about your property and what you want to achieve

Send a few basic details. Neo reviews what you need and comes back to you by phone or email to discuss it and, where needed, arrange an assessment.

What happens next

  1. We review your detailsYour property, usage and goals.
  2. We contact youBy the phone or email you give us, to ask what we still need.
  3. Assessment and written proposalSizes in kW and kWh, scope, and what depends on the site.

Request your free quote

Phone or email: give at least one.

Is this for a home or a business?
Selected from the page you came from. You can change it.
For example: “we export most of our solar and want a battery”, or “generation dropped after the summer”.

Have a recent electricity bill or photos of your switchboard? They help us size the system. We will tell you how to send them when we reply.

We use these details only to respond to your enquiry and prepare a quote. See our privacy policy.